911
by Jeff Prager
by Jeff Prager
Just a very short note. Around 2004 I decided to read everything I could find on 911. There is A LOT of material, that's for sure. So I read from late 2004 until mid-2010, when I stopped reading. I stopped reading because after 5 years of reading I realized I had found the Holy Grail of 911. I found very obscure documents with hundreds of verifiable references that laid out 911 like a bare rug. Every paragraph, every sentence, every word was true. And verifiable. Here's what I found. Read it all, or not. If you do choose to read this material every single question you've ever had will be fully answered:
Hi guys here’s some facts from a demolition guy:
I saw “shock tube” all over the place in the debris and in some other published pics, look it up… DYNO NOBEL SHOCK TUBE.. then go compare shock tube with what Romex® or THHN or mc clad wire looks like….
The buildings were supposed to fall immediately after each impact. Someone or something… intervened… Some unknown heroes lost their lives trying to stop them…
Dear Dr. Professor Abolhassan Astaneh-Asl, Ph.D., P.E.
• Astaneh-Asl said that steel flanges "had been reduced from an inch thick to paper thin." [3]
• At a recycling center in New Jersey, he saw 10-ton steel beams from the towers that "looked like giant sticks of twisted licorice." [4] He showed the San Francisco Chronicle a "banana-shaped, rust-colored piece of steel" that had somehow "twisted like toffee during the terrorist attack." [5]
• He noted the way steel from the WTC had bent at several connection points that had joined the floors to the vertical columns. He described the connections as being smoothly warped, saying, "If you remember the Salvador Dali paintings with the clocks that are kind of melted--it's kind of like that." He added, "That could only happen if you get steel yellow hot or white hot--perhaps around 2,000 degrees." [6]
• In an interview in 2007, Astaneh-Asl recalled, "I saw melting of girders in [the] World Trade Center." [7]
• He found a foot-long twisted shard of steel that was "like a piece of bread, but it was high-strength steel." He commented, "I haven't seen anything like this [before]." [8]
• He came across "severely scorched [steel] members from 40 or so floors below the points of impact [by the planes]." [9]
• The fireproofing that had been used to protect the WTC steel also showed evidence of extreme conditions. In some places it had "melted into a glassy residue." [10]
• Astaneh-Asl saw a charred I-beam from WTC Building 7--a 47-story skyscraper that collapsed late in the afternoon of 9/11, even though no plane hit it. "The beam, so named because its cross-section looks like a capital I, had clearly endured searing temperatures. Parts of the flat top of the I, once five-eighths of an inch thick, had vaporized." [11]
|
Sep 4 (9 days ago)
 | |||
| ||||
sorry
: for the concrete i meant pulverized rather than molten even though i
strongly suspect that most of the fibrous component of the dust is
actually concrete turned into what the labs have identified as
rockwool .... but remember that rockwool is made of slag fibers the same as the ones produced in volcanos when hot gases pass through silicon rich lava !
|
Sep 4 (9 days ago)
| |||
| ||||
The NYPD had concrete turned to lava on display. They took down that sign after Super Storm Sandy.
The only known examples I found are located in Russia after testing of nuclear weapons.
The only known examples I found are located in Russia after testing of nuclear weapons.
|
Sep 4 (9 days ago)
| |||
| ||||
being
aware of that i dont understand why you are still loosing your time
with nanothermite: it's not coherent! nanothermite is of course not
able to turn any piece of concrete into lava...!
No comments:
Post a Comment